Xantrex-technology 3000 Manuel d'utilisateur télécharger pdf (Page 36)

Operation

4–2 975-0128-01-01

Turning the Inverter Off Between Charges

The inverter draws less than 600 mA from the battery with the On/Off

switch turned on and no load connected, but left in this state the inverter

will eventually discharge the battery.

To prevent unnecessary battery discharge, turn the inverter off when you

are not using it.

Display Screen

You can monitor important status information on the LED (light emitting

diode) display screen.

To select which information the screen displays, press the Display

Function button. The

VOLTAGE, CURRENT and AC POWER lights indicate

what information the screen is showing.

Battery Voltage

Indicator

The

BATTERY VOLTAGE INDICATOR indicates the DC voltage at the input

terminals of the inverter. At low input currents, this voltage is very close

to the battery voltage. At high input currents, this voltage is lower than the

battery voltage because of the voltage drop across the cable and DC

connections.

Battery Current

Indicator

The

BATTERY CURRENT INDICATOR displays the current draw from the

battery in amps. It will not indicate current draw from other loads

connected to the battery.

Output Power

Indicator

The

OUTPUT POWER INDICATOR indicates the AC output power in kW.

XPower3000.book Page 2 Wednesday, December 10, 2003 6:52 AM

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 63 64

Pas de commentaire

Xantrex-technology 3000 Manuel d'utilisateur Page 36