Xantrex-technology C40R/50 Remote Manuel d'utilisateur télécharger pdf (Page 20)

975-0123-01-01 Rev A

Mounting the Remote (Step 3)

The remote can be permanently installed in a wall or cabinet.

The unit can also be flush-mounted into a rectangular opening in a wall

or surface-mounted using a double-gang, non-metallic outlet box.

To flush mount the remote, an opening must be cut in the backing

material to allow room for the circuit board, wires, and connectors.

Allow at least 1 ½ inch minimum clearance behind the circuit board for

the connectors and wires.

Important:

Use great care when cutting out the area for the circuit board

from the backing material (i.e., wallboard). Ensure there is enough area left to

securely hold the screws.

Figure 8

Minimum Clearance for the Remote

Faceplate

Circuit Board

Ports

1.5" (38 mm)

Minimum Clearance

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Pas de commentaire

Xantrex-technology C40R/50 Remote Manuel d'utilisateur Page 20